TI2 Delta 10", 16" Grizzly (113"blade), 15" General, Powermatic 141
2-1/4" Outside Diameter & 1-7/8" Inside Diameter
SET OF 3
Zero clearance band saw table inserts.
Made of MARINE GRADE HDPE
Use instead of standard metal inserts.
Will not hurt blade's teeth.
2 Reviews Hide Reviews Show Reviews
-
close, but no cigar
as with other reviews, close, but not exact fit for my 1963 Powermatic 141. Diameter fit, but disc was too thin to provide a flush fit to top of table. They offered a refund if I sent them back, but my shipping cost was too much to make it worthwhile. I'll have to write it off as a lesson learned....don't trust the description. Now i'm back to needing to fabricate my own....exactly what I wanted to avoid.
-
close but not quite right for a 1964 PM141
These are very rigid inserts and work well once installed. My problem with a 1964 Powermatic 141 is the 2-1/16" inner diameter is larger than this products 2" inner diameter, allowing the insert to rotate. The large diameter is a perfect fit. The saw also requires a thicker insert lip to seat flush with the table surface. All these differences were fixed with a bead of silicone applied to the lip area which flushed up the insert to the table top and blocked the insert from rotating.
