Blade Designation: Curve, Template and Pattern Cutting or
Ripping and Crosscutting
TPI (Tooth Per Inch): 6
Tooth Design: PC (positive claw)
Blade Thickness: .025
Tooth Hook Angle: 6.5°
Tooth Set Pattern: 5 Raker Set
Radius of Cut: 5/8”
Thickness of Work Material to be cut
Kiln Dry Wood: Hardwood 3/4" -2 1/2” Softwood 1/2” – 1 1/2”
18 Reviews Hide Reviews Show Reviews
has worked good so far.
These blades are the best. They stay sharp for a very long time, they NEVER break. I had my previous blade on my bandsaw for two years (with daily use on hardwoods). My last blade finally gave out. These blades are terrific, and I would whole hardedly recommend them to any owner of a bandsaw.
I have to say Timber Wolf blades never disappoint. They perform extremely well and under less tension than other blades I’ve bought. They tease straight and truer than any others I’ve tried, even in my classic ‘48 Delta-Rockwell 14” w/riser which only has a 1/2 HP motor the 1/2 blades are great! Smooth surface cuts always with the wolf.
This is my go to blade for all of my everyday cutting. They make clean cuts and last a long time. You can’t go wrong with them.
It works very smooth. The tensioning directions are a real help as my old band saw is home made.
Seems to me all the Timber Wolf Blades are a good investment. This is my second 1/4” blade works very well and retains that sharp edge a long time. My bandsaw is one of my main tools, after trail and error from many other brands, Timber Wolf are the blades I use. The Baker’s Wood Shop
It also will cut a tighter radius than the blade that came with my Rikon bandsaw. I was not able to get a straight cut without drift with my old blade not knowing it was worn. The setup instructions made all the difference along with this good blade, and my bandsaw runs better than it ever did allowing me to do more work with it, with consistent cuts and less mistakes.
Where are my blades. This is probably the last order you get from me
One of the best blades out there.